Sherlock Booknook: Part 4

Previously:

Sherlock Booknook: Part 1

Sherlock Booknook: Part 2

Sherlock Booknook: Part 3

FIRST, let me start by saying THIS IS NOT FINISHED. It’s about 80-85% Finished. There are still some things I need to add and some things I want to tweak and change. I’ll talk about more in this post. The reason I had to pause was… The touch activate wires are too short to hook up. I was finalizing assembly last night, and yeah. It’s MAYBE 1/3 of the length it needs to be. I’ve contacted customer service to ask for a replacement. I hope they come through. If they don’t, I’ll ask M how to extend the wires I have. I’m fairly certain I can just snip them and insert a length of wire and connect to either end, but I’d want to ask and electrical engineer first.

This is a good reason that I might order from their website direct next time. Direct support. Even though I used their official Amazon store front, hey might not help me out. If I had ordered direct from their site they would. So yeah. Magical Pharmacy might be a direct order.

Anyway, for that reason, the project is on hold. It’s also at a good pause state. I can look at it and see what I want to tweak and change. I can ponder…

It’s not even fully assembled yet. If I sealed it, I wouldn’t be able to wire in the sensor. I also plan to completely redo the outside of the box and haven’t even decided what I’m going to do for that. It has to be black and white because that printer is much better.

In the mean time, I decided that since I can’t showcase it yet, I’d show you a lot of my edits by using side-by-sides of the original. I’ve taken all the original shots from the CuteBee website. Except for one that came from Amazon Reviews. I really want to show yall how heavily I have edited this kit. It’s a “6 hour” kit. I’ve spent days on it already. Maybe even 6. Most things, like the paintings and even the books, were printed on the structure, and I’ve changed most of that shit. So for those unfamiliar with this booknook, I can show you with these side-by-sides!

Move-In Time!

Last night, I finally got to work on the upstairs. The excitement was exhilarating LOL. I spent a whole night cutting paper just for this. I made tiny Amazon packages (there’s a quarter in that picture for scale). I made a laptop and cell phone from scratch. I spent hours image searching and shrinking newspapers, paintings, photos, envelopes, letters, folders, book covers. I went to Hobby Lobby with K for little bits. I ordered shit from Alibaba for gods sake. I’ve been waiting over a month to do this.

The time has come. I had already assembled all the furniture. Time to put it together and for Sherlock to move in!

Rather than follow the instructions and decorate the furniture before placing it, I placed everything first. I’m doing my own decorating so I needed to see how it flowed and where I wanted things. It’s strange that in the original nook, the chair is the center of attention. I expected that in mine as well. But it turned out the desk is the center of attention in mine. So good thing I did the furniture first.

Baker Street

You’ve mostly seen Baker Street from my previous posts. But you haven’t seen a side-by-side! The only new things since last post are the fire hydrant, the lamp post, hanging lanterns, and the walls being up. Oh and I changed out the weird old vintage note on the bench for a modern letter. I added a little forensics book too. OH! And I glued down the toy gun I got!

A few things to note here. 1) It’s a lame crime scene, I know. But I had to use what the kit had, remember? I’m editing a kit, not building from scratch. You’ll notice the flowers in the back are changed from wood to 3D. I already showed you the updated signage on the walls. And look at the difference the crime scene makes with with 3D stuff. I ditched the old-timey lantern too. My sculpted clay pieces and toy gun and flowers are killing the original.

Another thing. Do you see why I took so much time painting edges? Look at the original mailbox. The sides of the iron railing. LOOK AT THE FIRE HYDRANT. That fire hydrant is fucking adorable. Whoever designed that from 2D snap together pieces — fucking-a. Bravo. Well, done. But it’s more brown than red! You gotta paint the edges!

OPINION REQUEST: I want to make my LED less bright and more yellow like theirs. Any suggestions for what to cover it with? I was thinking wax paper?

The Hidden Hallway

Unlike the website, I can’t rip most of it off to photograph inside the stairwell, so I’ve done my best. Husband lamented that there’s so much effort and detail in there that you can barely see. But isn’t that the point of these? Tiny little worlds that beg to be explored?

I know, I already showed you the flowers and mail — but now you can see what it was before. Upgradde with a double D for a double dose of pimpin’. NOTE: It had a candle and a vase. I removed all candles from this build. They were everywhere. On the furniture, on the shelves. I excato-knifed them all out. Same as the street lantern. We’re modern now.

As with everything else, I had to replace all the pictures I wallpapered over. I wish I’d have saved the credits shot for the back wall. I found a few gorgeous London pictures and an adorable painting of a red phone box with a couple walking by with a red umbrella. Oh and I blinged out the frames in metallic paint. White cardboard my ass!

It’s All in the Details

This picture is to show you what difference a little paint can make. Look at their globe thing. Can you believe it’s the same as MY astrolabe? Yeah, no. Mines got metallic paint that makes it look like an astrolabe. Like the lines are there on purpose and not just because I made a sphere out of 2D pieces. The blue is also a shimmery blue with hints of purple in spots. I’d say the seed beads were for flair — but they’re recovery. This kit is pressed paper and I smashed the fuck out of the tip and end trying to get that round end piece on. HOW are you supposed to apply pressure to get them to snap together? There’s no where to hold or even put pliers! So I had to cut them off. I replaced with seed beads, Mine look better anyway.

I adore this astrolabe and typewriter. The typewriter was another case of too much brown from the edges. I painted it bright red. Then I was like… I have made a mistake. This aint a Kitchen Aid mixer. So I went over it with walnut stain. Perfection.

Stain, you ask? You’ll notice this throughout this thing. I bought a furniture scratch repair kit to do the edges. It was the cheapest way to get a ton of brown markers in a variety — plus I already started fixing some dings around the house. Bonus! I wish I found this before my husband noticed when I scratched the floor.

I obviously fucked this up at some point, and got stain on the front of one of the pieces. So then I had to stain the whole thing – cause you can’t wipe that shit off like paint. And I liked it. I liked it a lot. So every piece of shelving and furniture in this room has been stained over. It allows the under print to show though — but just looks less cheap. More real. And since it’s stain, it adds beautiful striations as long as you go with the grain the wood should have. I might get the black stain that came with it and go over some bits on Baker Street that I just did with black paint. So the shelves and stuff in my pictures look richer and darker for that reason, not photo trickery. Mines just better.

Let’s Get The Initial Shock Out Of The Way. THE FRONT.

SURPRISE! Now keep in mind — WORK IN PROGRESS. I’m still tweaking a lot. For instance, I already took stuff off the table by the chair because it blended in with my beloved mail pile too much.

So you can see my fucking AMAZING chair and footstool makeover. If you didn’t read that part, I used clay to sculpt it to be padded. Especially that pillow. Like don’t use that unmodded pillow yall. It’s taking away from the already bad chair. But I’m not done with it. I want to buy some clear matte-finish paint and make it not-shiny.

Deep in the background, you can see that I replaced the painting above the clock with a bat — like the taxidermy bat shadow box Sherlock has in the show.

There was also the case of that “Detective” sign. The kit is for a detective agency. So I guess he felt the need to advertise above his desk. I thought about making it white and putting “Consulting Detective” there since that’s how Sherlock introduces himself. But this is Sherlock’s house. He doesn’t advertise. I couldn’t get rid of it though because it’s a structure for an LED above the desk. So… A light fixture? I printed out some more modern options but went with an Applebee’s-flavored stained glass shade.

The only other thing I’ll note here is the colors. You can see that my brighter books, white paper prints instead of aged stickers, and color prints instead of old-timey black and white have modernized it just like I wanted. Old Victorian flat in modern times. I think I nailed it.

Sherlock’s Desk

I had so much fun with this area. I did not think this would be the main focus, but it totally turned into it. You can see I ditched a bunch of the kit’s stuff. The old phone, looking glass, feather quill, candle. Whatever that thing right behind his chair was. That’s where I put in a cameo for a pair of earrings. And next to the cameo is Dr Watson’s “A Study in Pink” which was his blog post of the first episode. With the skylight, you can get a good view of it and see the whole title.

We’ve got London A-Z which they used to solve the code in “The Blind Banker.” We got a laptop (yes, it’s too fat — but I made it from scraps of the kit and the pressed paper is thick). He’s got a whole bottle of brandy and an insanely tiny glass of brandy — they’re very shiny in person! He has has carelessly placed the glass on his papers which it has already stained. (Another happy accident, not on purpose. I had placed the glass on the desk and then decided it should be on papers. So I quickly pulled it up but the glue had grabbed a bit of the dark stain from the desk. Looks like spilled liquid around the rim).

Also, those papers were tri-folded like a real letter before gluing down. Of course, his trusty cellphone is there. The portrait of Arthur Conan Doyle is replaced with (a print of) the skull he likes to talk to that Mrs Husdon keeps hiding.

Hard to see at this angle, but there’s a stack of books shoved under the desk and one of his favorites leaning behind his chair.

Possibly my favorite bit of this build is the massive pile of deliveries and mail. Like he walks in the door and just throws it on his desk and it just piles there on the floor. He can’t be arsed to bother with his mail. And yeah, I made insanely thin strips of blue paper for Amazon tape but only used it on two boxes because it was a pain. But yeah, this is why I made all those envelopes. British envelopes and American ones with different colored stamps, some bills with prepaid labels, some colored cards. Perhaps cards from fans — perhaps little Kirsty asking him to find out what happened to the luminescent Bluebell.

Right Wall

Look, I’ve discussed it before – but god damn my case board is a masterpiece. The modern maps — the photographs of the characters from the show. The seed bead pins and fine thread tying it all together. And yeah, Jayne from Firefly is still there. And the little sticky note of Moriarty’s “I O U.” OK, this might be my favorite area. I’ve just had it around for longer. Now it even has the astrolabe, so yeah, it might be the best area. OK, it is. But the mail stack is new.

Note the difference the stain pens make on the furniture. I sanded down the cane and painted it to be Dr Watson’s medical cane he used for the psychosomatic limp he had before he met Sherlock. Can you spot River Song’s diary?

I love his pile of newspapers. He can’t be bothered to toss them when he’s done. I printed off lots of London papers to shrink down and fold up. Some are even under the stool, they’ve been there so long.

OPINION REQUEST: Should I add seed bead handles to the dark cabinetry?

Left Wall

I haven’t done the door yet. It was supposed to have a dart board on it but bleh. It also needs a door handle of some sort. I think I might do the spray paint smile that Sherlock did and shot up whenever he was angry. There was no where to do it on the wall paper, so I could sub the door. Only problem is he did it in yellow paint because it was the yellow paint they used as a clue in “The Blind Banker.” And yellow isn’t going to show up on that door. One option is switching the white and gold door for a black and gold door. It can’t be a color because I’ll need to use the better resolution of the black and white laser printer. And I can’t paint that fine detail on it. If I did THAT I could do it in yellow.

OPINION REQUEST: Black the door and do the yellow, or leave it white and use another color? If the latter, what color?

Then I’ll rough it up pretty good with the exacto knife like he’s shot at it a few times.

Oh and the purple scarf is there to represent the purple shirt of sex. If you were around when the show aired — Benedict Cumberbatch became a huge sex symbol. And when he wore that purple shirt — whoo, the internet was on it.

The Mail Stack

Just for funsies, the mail stack. It tickles me that some of the envelopes are First Class and he has no fucks to give.

Next Up:

Sherlock Booknook: Part 5: The Finale