Compost Bins: Stage Two

The Stages

Stage One of building the compost bins is complete. That was getting the corrals up.

Stage Two is now complete! I put the fronts on the corrals!

Stage Two++ is in progress which will be using the metal mesh to corral the leaves and hay from blowing all over the yard. I made the sides which will be the depth of the corrals. Now I need to make the back and door. I can do this in the garage since the width is arbitrary to the wood available.

Stage Three will be the top. This is not planned out as well. My ideas are fluctuating. And I’m in no huge hurry. I mean the materials is still decided. But do I really want one huge lid? I don’t know. We shall see.

Saturday Morning

So last we left off, I had the corrals of my compost bins up. But they still needed fronts. So this Saturday, I decided to conquer Stage Two. This was going to involve my first experience with a circular saw, so I knew it was going to be a lot. So I set up camp. All my materials laid out. A chair for rest. An umbrella for sun. And the VIP of the day: my new Worx WX065 Clamping Sawhorses with Bar Clamps.

Seriously: These sawhorses are fucking amazing. How are you suppose to saw shit without the clamps holding it in place? And the saw horses are built to hold and lock-in the clamps, but you can take them off and use them by themselves. You can also take them off to store them — in the built-in slot that holds them. They fold up. They’re light weight. They hold a thousand pounds (together). WTF. These are amazing. Since you have to use two hands to use the circular saw, I don’t even know how I would have done this without these things. They’re the things I didn’t know I desperately needed.

I also used my new circular saw! I’m not great. For some reason, when I get to the very end of the cut, it wants to kick and not finish that bottom corner. I corrected for this by using a piece of scrap wood behind the pieces I needed to cut to cut into, but WTF? I need a class. Anyway — I got set UP and ready to conquer. I even had a ton of drinks in the wagon.

Since sawing things was intimidating, I started with the rebar. I wanted to secure the front of the corrals with rebar in the ground. I didn’t think this would be a difficult task, but it was. I’m not known for my strength. So hammering rebar a foot into clay was more difficult than I expected. It got easier as they got down to a height that was more natural for my arm — but damn. I secured them to each side with some metal straps.

Yeah, they’re real crooked. Don’t judge me. I did this whole project by myself.

Then, I had to embrace cutting wood. So the front of my bins are stacked boards. To secure these boards, I made a little wood I-Beam on the front of each post. So a little 2×2 spacer sandwiched between two 6 inch fence boards. You can see I secured the spacer and backs to the posts first with some 4 inch screws to really get them in there. I also wanted to easily measure how long my horizontal boards needed to be. I expected each bin to need a custom length or there to be longer and shorter lengths on top and bottom. But I was pretty damn square.

Then, it was lunch time.

Saturday Afternoon

After lunch, I needed to put the fronts on my I-Beams and start cutting my horizontal slats. I measured 35 inches from spacer to spacer and 31 inches from inner to inner post. So I made my boards 34 inches. This gives them a whole inch of wiggle room if the walls shift and makes getting them in and out a breeze. But I still have 3 inches to hold them in there, so no need to worry about centering them.

My first test slats: SUCCESS!

Now to cut 13 more.

Look at my happy fronts! There’s tons of wiggle room for boards to curl, but not so much that two boards could slide over each other.

Also, the front posts are taller so I can place a 2×4 across the top of each side and they will cover it. You can see I had one laid on top in an earlier picture when I was measuring how long to cut those.

LOOK! I DID IT!

Fucking beautiful.

Sunday: COMPOST DAY!

So the next day, I built my compost pile. This had the added benefit of raking leaves and pulling vines off my house to use as composting material for the 3 gallons of kitchen waste I’ve accumulated in the fridge waiting on my ass to actually complete this project. Ok, it’s not COMPLETE, but it’s to a functional stage.

I made my pile with marigolds, a fuck ton of lemon grass, vines, and half dead plants for the “greens.” And crusty old lemon grass, leaves, hay, and cardboard for the “browns.”

Don’t worry, the card board was cut up pretty small, see:

I also cut up the vines.

Next Up

I did make the two sides for the browns corral. I can finish it off in the garage and place it out there whenever I get around to it. It’s a very simple frame that I will staple the wire mesh into. The front will be a gate that matches the bins.

Then, eventually, I will make a lid. Or lids. The plan is in flux. Right now, my compost pile just has a big square of cardboard over the top. It’s fine.

Super proud of myself! GO ME!