Tag: garden

Fall Stairs

Posted on | by cursingcats.com | 1 Comment on Fall Stairs

So, I had all my pumpkins around the house.  Some had spider mites and I was trying to be okay with it but they were multiplying and I was afraid they’d get in my plants.  So I finally decided to ditch the pumpkins. 

Well, that’s an ordeal cause I need to scrape the seeds out before I throw in the compost.  I have a lot of cardboard, but I need to break it down to counter that much pumpkin.  So I started putting them on the back stoop.  Figured I’d scrape them out there later this weekend. 

I felt bad though because they’re so FALL.  And it’s still Fall. 

Then it occurred to me that I’m stupid and they’d look gorgeous on the front steps.  Who cares about mites out there? Look at the pretty!

The Great Inaugural Pumpkin Patch of 2024 Final Results

Posted on | by cursingcats.com | 1 Comment on The Great Inaugural Pumpkin Patch of 2024 Final Results

So my first time ever growing pumpkins. My first pumpkin patch. How did it go?

Pumpkin Patch Overall Yields

I’ve picked the last pumpkins in the patch. The water is off. So here is the Great Inaugural Pumpkin Patch of 2024 yields.

* 4 Rouge Vif D’ Etampes (One died on the vine during the Great Pumpkin Massacre)
* 5 Musquee De Provence (One died on the vine during the Great Pumpkin Massacre)
* 1 Jack O Lantern (he had a similar stunted friend who rotted on the counter)
* 1 Connecticut Field
* 18 Jack Be Little
* 14 Chinese Miniature White

The picture below shows the pumpkins lined up in the above order and from oldest to newest.

Each large vine was singular in a 20 gallon grow bag. The two miniature vines shared a 20 gallon grown bag. Each individual vine had water that went off every 6 hours into a gallon jug that slowly trickled into the bag.

After the Great Pumpkin Massacre, when they were deprived of water for 4 days in mid summer, the two french varieties survived by sacrificing a pumpkin each. They shriveled up so the vine could consume the water. The Chinese Whites did not shrivel, but simply stopped growing. After this, the Jack O Lantern and Connecticut Filed never put out any more females.

Pumpkin Variety: Rouge Vif D’ Etampes

These came from Bakers Creek Seeds. The description warned that they were very unwieldy and I think that made for their survival and bigger yield. They also had HUGE leaves. It was the first and last to put out pumpkins.

Turns out my first pumpkin was my largest and favorite of the season. It was this one (photoed next to my smallest pumpkin):

Part of the way through the season, I started righting the pumpkins as they grew. I think these actually look a lot more fun left to grow in whatever shape they like. Pretty sure these will be the only one I plant again next year (aside from the littles).

Pumpkin Variety: Musquee De Provence

These were the prettiest vines but I won’t be planting them next year. The vines had a gorgeous white veining in the leaves unlike any of the others. And the pumpkins are the most traditional pumpkin shape. The pumpkins grew dark green and looked like a nice watercolor.

If they stayed dark green, I’d like them a lot better. I thought they would turn grey (and some varieties do), but mine turned into a peachy light orange. I’m not a huge fan of the final color. You can see the maturing difference in the first pictures I posted with the whole yields. They’re dark green when you pick them and then they turn peach.

I won’t plant these next year because I didn’t like how pointy the vines were. I went out every day to make sure the flowers got pollinated and walking through the patch in shorts, I got scratched by these a lot. Picking them was also a pain for that reason.

Of note: This one survived the Great Pumpkin Massacre (Drought) by shriveling up and draining a pumpkin:

Pumpkin Variety: Jack O Lantern

This was the biggest let down. Note that these seeds did not come from Bakers Creek, so the quality of the seeds might be part of the problem. They took the longest to mature, so they got a month long head start over the others. I think this head start lead to their detriment when the pests hit. So all of the advance start was wasted to pests.

I’m guessing it was the pests, but this vine only put out 2 pumpkins. They also came out when we had over a week of rain which led to one getting a bit rotten on the bottom. That’s when I learned to put the pumpkins on racks off the ground. I let it keep growing anyway though. I left them on the vine until they ripened because I expected them to get large and they were not at all large. Here they are:

Yeah, talk about disappointing. Also, the only way to hide that bad spot was to set it on its side which was super cute! Until I woke up to pumpkin juice everywhere and had to throw it out and clean up a lot of pumpkin juice.

After the massacre, they didn’t put out any more female flowers. I don’t know if it was the lack of quality seeds, or the attack of pests, but this vine SUCKED. Will no be planting again.

Pumpkin Variety: Connecticut Field

This was a quality seed pack from Bakers Creek like the others, but what a let down. This vine only put out two long vines and one single pumpkin. It was a good size, unlike the Jack-O-Lanterns, but fuck that.

Pumpkin Variety: Miniature

Now these were awesome. I see no point in NOT planting miniature pumpkins. I did two in one container and they had great yields. Specifically: 18 orange Jack Be Littles, and 14 Chinese Miniature White.

So you get a lot of bang for your buck! They make adorable displays because you have so many. And thay mature very quickly unlike the large pumpkins. So less patience required. Seriously, even if I didn’t do a “patch” again, you gotta do the minis. So worth it.

Pumpkin Patch PESTS

I have literally never grown anything on the land that this patch was grown on. So it was even stranger that I had such huge pest problems.

First, came the slugs. I didn’t know what was eating my leaves so I went out one night and found like 15 slugs on the end of my single Jack-O-Lantern vine. They had killed it from that point down. Fuckers. Luckily, slug bait fixed that. But EW — I picked them off that night and just EW.

Then came the squash bugs. They kicked my ass all season. The adults don’t respond to Sevin dust either. So I used ungodly amounts of Sevin Dust and sprayed RAID too. And I had so many bees that I could only spray the RAID in the evening. So it just sucked. And you’d think you got a handle on it only to find a pile of eggs the next morning. FUCK THEM.

Then, after I harvest my last pumpkins, I caught a squash borrower. I never noticed them all season. However, one of my little white pumpkins in the kitchen had gunk on it one evening. Well, that’s weird because I scrubbed them all when I brought them in. So I took it over to the sink to wash it and it had a perfect little circle in it.

I sat it on the counter to stare at it and a little fucking green worm popped out! WTF! Bastard. So I guess those will be a possible problem next year.

None of these vines will be going into the compost due to the pests. I’m going to bag them up in the garbage to be hauled off.

Pumpkin Patch Results

Well, I couldn’t bring myself to put them outside. So I have a lot of cool pumpkin vignettes in the house.

So that’s really fun. And I’m super proud of my pumpkins. It was also a cool hobby to have during the summer. I got to bond with Louie as he got so accustomed to coming out with me every morning. I learned a lot too!

Lessons for Next Pumpkin Patch

I learned early on that you gotta have a watering system. Pumpkins are THIRSTY. And make sure the fucking gutter cleaners don’t turn it off and kill your months worth of work!

Next time I will only plant pumpkins that can cross pollinate with each other. This will alleviate me having to go out every morning to pollinate the flowers. It turns out we had a ton of bees. So next time, they can do the work.

I grew the vines how I wanted them to grow. And that was East (using strings). They do not want to grow East, they want to grow South. So why fight that? Also in this same vein, I planted them where I did to get the most sun. Well, fuck that. They were dying every afternoon. So I would rotate the square I planted them in.

I learned not to let the growing pumpkins sit on the ground. I used my old bakers racks to raise them off the ground. Then some old tiles when I ran out of those. However, with the Rouge Vif D’ Etampes, I learned that those particular pumpkins are cuter if you don’t set them straight upright to grow. They look fun a little wonky. The Connecticut Field is the opposite.

I used cloth grow bags over plastic for appeal, but they just molded and mildewed so that was a waste.

I planted marigolds to attract the pests before they got to the pumpkins, but I didn’t plant them early enough. The pumpkins established months before the marigolds did. So those need to go in way earlier.

In Closing

I have earned my pumpkin tattoos.

Compost Bins: Stage Two

Posted on | by cursingcats.com | 1 Comment on Compost Bins: Stage Two

The Stages

Stage One of building the compost bins is complete. That was getting the corrals up.

Stage Two is now complete! I put the fronts on the corrals!

Stage Two++ is in progress which will be using the metal mesh to corral the leaves and hay from blowing all over the yard. I made the sides which will be the depth of the corrals. Now I need to make the back and door. I can do this in the garage since the width is arbitrary to the wood available.

Stage Three will be the top. This is not planned out as well. My ideas are fluctuating. And I’m in no huge hurry. I mean the materials is still decided. But do I really want one huge lid? I don’t know. We shall see.

Saturday Morning

So last we left off, I had the corrals of my compost bins up. But they still needed fronts. So this Saturday, I decided to conquer Stage Two. This was going to involve my first experience with a circular saw, so I knew it was going to be a lot. So I set up camp. All my materials laid out. A chair for rest. An umbrella for sun. And the VIP of the day: my new Worx WX065 Clamping Sawhorses with Bar Clamps.

Seriously: These sawhorses are fucking amazing. How are you suppose to saw shit without the clamps holding it in place? And the saw horses are built to hold and lock-in the clamps, but you can take them off and use them by themselves. You can also take them off to store them — in the built-in slot that holds them. They fold up. They’re light weight. They hold a thousand pounds (together). WTF. These are amazing. Since you have to use two hands to use the circular saw, I don’t even know how I would have done this without these things. They’re the things I didn’t know I desperately needed.

I also used my new circular saw! I’m not great. For some reason, when I get to the very end of the cut, it wants to kick and not finish that bottom corner. I corrected for this by using a piece of scrap wood behind the pieces I needed to cut to cut into, but WTF? I need a class. Anyway — I got set UP and ready to conquer. I even had a ton of drinks in the wagon.

Since sawing things was intimidating, I started with the rebar. I wanted to secure the front of the corrals with rebar in the ground. I didn’t think this would be a difficult task, but it was. I’m not known for my strength. So hammering rebar a foot into clay was more difficult than I expected. It got easier as they got down to a height that was more natural for my arm — but damn. I secured them to each side with some metal straps.

Yeah, they’re real crooked. Don’t judge me. I did this whole project by myself.

Then, I had to embrace cutting wood. So the front of my bins are stacked boards. To secure these boards, I made a little wood I-Beam on the front of each post. So a little 2×2 spacer sandwiched between two 6 inch fence boards. You can see I secured the spacer and backs to the posts first with some 4 inch screws to really get them in there. I also wanted to easily measure how long my horizontal boards needed to be. I expected each bin to need a custom length or there to be longer and shorter lengths on top and bottom. But I was pretty damn square.

Then, it was lunch time.

Saturday Afternoon

After lunch, I needed to put the fronts on my I-Beams and start cutting my horizontal slats. I measured 35 inches from spacer to spacer and 31 inches from inner to inner post. So I made my boards 34 inches. This gives them a whole inch of wiggle room if the walls shift and makes getting them in and out a breeze. But I still have 3 inches to hold them in there, so no need to worry about centering them.

My first test slats: SUCCESS!

Now to cut 13 more.

Look at my happy fronts! There’s tons of wiggle room for boards to curl, but not so much that two boards could slide over each other.

Also, the front posts are taller so I can place a 2×4 across the top of each side and they will cover it. You can see I had one laid on top in an earlier picture when I was measuring how long to cut those.

LOOK! I DID IT!

Fucking beautiful.

Sunday: COMPOST DAY!

So the next day, I built my compost pile. This had the added benefit of raking leaves and pulling vines off my house to use as composting material for the 3 gallons of kitchen waste I’ve accumulated in the fridge waiting on my ass to actually complete this project. Ok, it’s not COMPLETE, but it’s to a functional stage.

I made my pile with marigolds, a fuck ton of lemon grass, vines, and half dead plants for the “greens.” And crusty old lemon grass, leaves, hay, and cardboard for the “browns.”

Don’t worry, the card board was cut up pretty small, see:

I also cut up the vines.

Next Up

I did make the two sides for the browns corral. I can finish it off in the garage and place it out there whenever I get around to it. It’s a very simple frame that I will staple the wire mesh into. The front will be a gate that matches the bins.

Then, eventually, I will make a lid. Or lids. The plan is in flux. Right now, my compost pile just has a big square of cardboard over the top. It’s fine.

Super proud of myself! GO ME!

Compost Bins: Stage One

Posted on | by cursingcats.com | 1 Comment on Compost Bins: Stage One

The Stages

Stage One of building the compost bins is complete. They are standing. There are three corrals. They look great.

Stage Two will be adding the front faces to the corrals — I hope to accomplish that this weekend. All of the materials have been acquired.

Stage Two++ has been added which will be somehow using the metal mesh to corral the leaves and hay from blowing all over the yard. I’ve got ideas. More coming on that later. Maybe I can work on that this weekend too. But it’s not part of Stage 2. It is an additional and optional task.

Stage Three will be the top. This is not planned out as well. I know the roof design. I’ve chosen the materials and the design from a build I like. Now how I attach it… I would love to have someone with more skills and tools help. I will be building the height of the back of the corrals up a slight bit so the lid will slant forward. It will rest on the front with hinges in the back. However, I would absolutely love for some help to build up the sides (inner and outer) to match the angle so that it lays flat on the structure. Not required, but I would like that.

One Stage Down

So I ended up going for a kit. I used two of the “Greens Fence” brand “Composter” kits. They sell these at big homes stores like Home Depot and I scored mine on sale on Wayfair. You can buy them online on their site too. They’re extendable, and customizable.

I assumed I could get someone to build me something for much cheaper. I was very wrong. With inflation — wood prices have skyrocketed. The only compost bins I could find on Marketplace and local sites were really bad and more expensive than the kit. So I drew up this sketch of what I thought I wanted and tossed it out to three local builders to see what they could do. I mean surely if you use pressure treated pine (as opposed to cedar) and don’t use all the fancy dovetail cuts, it will be cheaper right? Here’s what I sent. I did this really quick in Photoshop, but I’m low key proud of extending that picture to three bins.

The closest one guy could get was two bins in pine for that price. Yeah… no. So I ordered the two kits on sale with free shipping. They got here in like three days. I was very excited to put them together but I didn’t. Like this is adult lincoln logs. There is nothing to fix together — just build and go. No nails, screws, or glue needed. Now, I didn’t do it that way, but still.

I just couldn’t get off my ass and do it. This who menopause thing has me napping every damn day and I just haven’t wanted to go out in the hot garage and put this shit together. As much as I want to play with the blocks, I don’t want to. So I just kept watching youtube videos and getting nothing done. Until…

I embraced the fact that it wasn’t happening. Fuck it, I’m in the living room and they will be too. So I decided to build all the sides in the airconditioned living room while watching youtube. And that’s what I did. I put together the four sides in the livingroom. I had little cedar squares cut for the “feet” so there would be slight protection from the ground. I know they will rot eventually, but lets let my feet rot first and give me a chance to replace those before the posts.

FUN TANGENT! One of the reviewers gave it a bad review. They assembled it in the garage and when they went to move it outside, all the bottom pieces fell out. No shit, Sherlock — nothing’s holding it together. People are so stupid.

So I screwed the feet on on the posts and proceeded to build my giant lincoln logs set. One runner, two spacers — repeat. However, I used wood glue. Not just any wood glue, I used Gorilla Brand Wood Glue. As Adam Savage says, wood glue is amazing. It’s one of the only bonds that is strong than the thing it bonds. And from every experience I’ve had with Gorilla Brand — they are just OP. (That’s Over Powered for the nonnerds). Like Gorilla says “hold my beer so I won’t glue it to myself.”

Seriously, I have a sunsail on the side of the house to cover the pool equipment. One anchor pulled out last year and I liquid nailed it in place. It still pulled out. So this year, I bought bigger and deeper anchors to install it. Still pulled out. So I googled what the strongest of the Gorilla Glues was — it’s the Clear Constructions glue. Surprisingly not the regular one — the clear one. I used that shit. That anchor is part of the house now. If you want it down, you will need to replace those bricks. I squeezed it in the holes, put the anchors in, squeezed it in the anchors, gobbed it all over the anchor plate, then screwed it on. It hasn’t moved. It is part of the house now.

So that was actually kinda fun. The middle sections don’t have all their slats, so I used screws to just prop up a spacer where I needed it until the glue hardened. Four sides complete.

I’m also lining this in metal mesh. Did I mention that? Yeah, quarter inch hardware cloth. Like, yes, I’m not an idiot. I know critters will get in. But I don’t have to give them an open invitation. Also, when I turn this shit I don’t want to constantly be raking up everything that fell through the slats. So I went ahead and installed that inside too. I precut the metal mesh in the garage with my dremel and stapled it on in the house. The middle sections have mesh on both sides to keep a little air pocket between the corrals because compost needs air. A tip from another build I stole.

You can see here that I cut the mesh purposefully a bit wide to account for my not putting it on straight. I just used this metal leveler I had handy to bend the mesh into the corners.

I did actually consider building two of the corrals inside and then attaching them with a back wall outside, but they were getting heavy. With the metal mesh, they were a lot heavier. So the backs had to be assembled in the great outdoors. Boooooooooooooo

I actually did another extra step. Again, critters will live in here — but I don’t have to leave the light on. So I trenched a bit around the inner edges and buried some mesh in the dirt a bit and stapled it to the bins. While doing this I totally put all my weight onto one foot to get the trowel in deeper and totally fell in the mud. It’s fine.

Did I bury it deep? No. Don’t I realize they’ll get in anyway? Yes. But I’m not the Super8 Motel OK, I can do what I can.

So then I glued the back slats and spacers in place and rested. Because it is hot outside and there are mosquitos.

Then I came back and stapled all the mesh up onto the sides and the mesh sheet on the back. WHA LA! Each section is a three foot cube. The three bin system has you using the left-most bin constantly for new scraps and waste. You can turn back and forth between two bins until you get some stuff thats mostly composted. Then stuff that’s mostly composted goes into the middle bin and new compost and still big chunks stay in the left bin. Finished compost (and my overwinter dirt storage) goes in the right bin and is ready to use at any time. Since I have the quarter inch mesh, I can make a really big portable mesh screen to just cover the top of that bin with some scrap wood. That will be my filter. FREE SIFTER, BABY.

Coming Soon

So this weekend (hopefully), I will install the fronts. As in the drawing I used to show the wood workers what I want, I’ll be doing slats. This is all real cedar. To make the slat tunnels/holders/sides/whatevers, I bought cedar fence planks. So it’ll be a sandwich of cedar plank, spacer, cedar plank stuck on the front of each post. The fronts themselves will be cut wood. Specifically treated pine fence planks that were dyed to look cedar. Cause, listen, I can more easily replace rotting sliding planks than pieces of the actual unit. Cedar for the bins, pine for the front slats.

I already have the materials and a spiffy new circular saw to get it done!

Oh and I need a browns corral. I already have my hay bale out there ready to get to workin’! And I’ve already notice the wind blow a bit of it around. I’m also going to want to have leaves on hand (and pulled weeds) to add as I add greens. Well, as I’ve already taken the build specifics from a lot of different peoples bins to make my fankenbins — I’m taking another. One guy had a cylinder of wire mesh next to his that he kept his browns in. Wait, I have a fuck ton of wire mesh now. So I’m gonna buy some rebar stakes and make a little square on the side there for me to dump leaves and stuff in for easy access. It won’t be part of the bin system and lid. Just a corral for my browns. I want to put a “door” on it for easy access when it’s low (also because hay will probably be on the bottom and leaves on top and ill want to grab a mix of browns). I’ve got some scrap lumber in the garage, I might try to outline it in lumber and make a little mesh gate door for the front.

Since I bought two composter kits and assembled them in my own fashion, I have a lot of extra slats. I can use some of the extra slats to make the front gate of my browns corral match the sides of the bins perfectly!

Now we’re getting somewhere!

Phase three isn’t on a schedule. If it starts to rain a ton, I can throw a tarp over the active bins. It’s going to get done. But I can start composting this weekend. Not have to wait on the lid.

It Keeps Spiraling

Posted on | by cursingcats.com | Leave a Comment on It Keeps Spiraling

The BABIES!

If I turn into a crazy plant lady propagating shit to hoard and sell online, this is where it started. Right here.

Look at these little adorable babies. I made these. Free plants. They’re cuttings from my other plants. LITTLE BABIES! On the left, you’ve seen my Fishbone Cactus scrap cuttings. They’re doing well. And on the right we have K’s prayer plant. She requested a cutting of mine. I didn’t want to cut it, but she did cut her Christmas Cactus for me so…

It actually worked out for the better. I had three vines just growing all lopsided and sloppy. I snipped off one vine and made 5 cuttings. Then, I actually staked the other two vines. So my original plant actually looks better than ever! It’s all spread out and just popped out three new leaves! And LOOK AT THIS ADORABLE BABY! So adorable! I love it. I wants to keep it. I don’t need it and I don’t do unglazed terracotta. It’s just adorable. It’s also the only 2 cuttings that rooted. Yeah, this one didn’t take well. I used rooting hormone and everything. 40% survival rating. So I put the two survivors together here.

My little babies!

I actually rooted some of the Christmas Cactus of Friendship for K2 earlier. Now it’s on to the third friend in the chain! All three of those cuttings grew great roots. I watered them last weekend while K2 was on vacation and all three cuttings had baby leaves already! So fun! Baby plants! Free plants!

PUMPKINS!

Also, right on time, Publix has their pumpkins out! So normally I would have bought a few. But I already have my own pumpkin display!

These are the guys that survived the Great Pumpkin Massacre. Obviously squash bugs kicked my ass this year. And there was a huge learning curve. So my harvest wasn’t huge. And then…well, the massacre. That’s why there are so many super teeny tiny white pumpkins. The massacre halted their growth and they tiny. But adorable.

However, three of the vines have started putting out again so I think I’ll get a few more pumpkins! I will do a post at the end of the season and show all of them and everything I got from each vine. Believe me, I’ve taken tons of photos. I love pumpkins (have you seen my tattoo? There’s two main pumpkins, a Jack-O-Lantern lid on my shoulder and a big pumpkin vine on my back)! Lots of lessons learned this year. But to think — this is from SIX PLANTS. Six tiny little seeds. Six seeds made all this! Did it cost more than the Publix pumpkins? Yes. Was it hard? Yes. Did I cry? Yes. Am I so proud? Hell yes. My pumpkin babies! It’s like magic. Like six tiny little seeds in some dirt made all these. Like how? MAGIC IS HOW.

Composting

What else? Oh, I’m going to start composting now. I’ve been toying with the idea this season. Mainly just because of dirt storage. I usually over winter my summer plant dirt in pots or a bag in the garage. But you have to keep that shit watered or it becomes hydrophobic. So you literally have to water dirt. Last year was the first year I’ve ever overwintered plants. I’ll be overwintering my ferns this year and maybe the front porch plants. But I’ll still have a ton of dirt. Those pumpkins are in six 20lb grow bags. And I’m overwintering the lemon grass as rooted cuttings in water. So there’s all the dirt from them too. Dirt is expensive.

(NOTE: On second reading, yall might not know why I store dirt! Ha! Well, dirt is different all over the world. I happen to live where it’s all red clay. Like my outside dirt is red clay. It’s hard and it stains fucking everything. Red clay mud is the devil. So we have to buy our gardening dirt. When we plant flower beds, we buy all that dirt. Like the first time I traveled and saw a bunch of black dirt just on the ground, I was like “that’s a lot of money wasted.” So yeah, we have solid as fuck foundation dirt — but not good for the pretty plants dirt. We buy that shit. And it’s expensive.)

Also, this year I got a real eye opener in good dirt vs bad dirt. I got some super cheap dirt at first so I have a few pots with it. Then I bought two car loads of good dirt for the pumpkins and front porch. So at the plant swap, I picked up 3 miniature sunflowers. I put two on the front porch (in the good dirt pots) and one on the back stoop (in the poor dirt pot where the coleus hasn’t even done well). Holy shit. The sun is about the same. The water is about the same. But DAMN. The ones in the front have had like twenty blooms each. The back — maybe five? And that dirt won’t hold water to save its life. Even the coleus is sad in it.

So I’ve been tossing around the idea of composting. K2 jumped on it like a spider monkey because she wants to stop throwing away her food scraps. So if I compost, she can dump them here. And we have a lot of food scrap too. Come fall, I’m going to have a lot of plant scarp as well. And dirt to store. So… why not compost it? It’s not like I don’t have the ROOM.

So I’ve been learning. I learned it actually required effort, one. I mean I thought shit just rotted in a pile but no, it’s more complex than that. I learned about ratios and that it actually might require watering. Well, I had planned to chunk it in the back of our lot. But if I gotta turn this shit weekly (more like daily if I hot compost)…

In the beginning, I probably will actually hot compost when I clean up the pumpkin vines. Maybe get the yard guy to bag the clippings next cut to get started. And I’m already storing up all the brown packing paper I get for the browns. (Simplest dumb way to hot compost is apparently 50% greens to 50% browns. Stir to aerate daily or you get the sludge of death from too much anaerobic greens). And the browns need enough water to break down because brown cardboard and paper is kinda dry.

So weekly and sometimes daily effort plus water hauling? That’s not going in the back of the lot. I’m not walking all the way back there every day to do manual labor. There’s poison ivy in that grass, on all the trees, and I can’t get near the over growth. So no. It needs to be closer to the house. So I need bins. I need affordable and something husband won’t despise. (Do yall know he’s trying to say I don’t need my fancy pendant grow light for the Great Monstera? Um I do, and I will buy it anyway). So I try not to push him all the time. When it was going in the back of the lot I was gonna throw up some metal panels or something, but closer to the house I don’t want it to look like shit. So I’m doing something like this. I have this drawn up in Photoshop because I was querying local wood makers on prices:

So that design is from a kit I found, and a bunch of ideas from various youtube videos. I think the lids will actually be metal siding/roofing to keep most of the rain out, but obviously it won’t keep all of it out. Or I might still do mesh — not sure. I could even just use an old tarp and stretch it over the wood frame of the lid like a canvas. I have a clever solution for holding and closing the lids that I’ll totally show you. I’ll document my build. The sides will be the wood slats, but I bought 1/4 inch metal hardware cloth to staple all the inside edges. This will help keep the finer bits of compost in while allowing plenty of air. And I’ll do mesh on both sides of the center divider framing so there will be a good 1 inch pocket there — more air.

I really thought I could get someone local to do something cheaper than the kits online. But wood prices have skyrocketed so damn much, it’s just not gonna happen. It’s such a simple design too! The kit has all precut pieces and is expandable I figured local build wouldn’t have to do all those cuts. Wouldn’t need the dividers. Could just screw everything together on site. Nope. No one could come close to matching the kit prices.

So I’m going with the three foot composter from Cedar Wood. Did you know you need at least a 1 meter x 1 meter pile to hot compost? You do. So I’m going to buy two of these kits and bastardize it. I calculated all sorts of ways to do this. One composter plus spare parts (you can buy individual bits on the site). Two composters. A composter plus an HVAC cover. I’ve been mathing. I settled on two composter kits which I will use to create my three bin system with exactly six three-foot lengths of cedar leftover (plus a lot of spacers I won’t need). Those will probably be involved in the lids.

You can buy these kits at Home Depot so I did think to look around the internet for coupons and prices. They’re actually cheaper on almost every other site, including Lowes. But look at you, Wayfair, with the deep cut! I see you! Order placed. It will be here tomorrow.

So tomorrow I will have the kits, my plan, and the mesh. I’m sure that will take me longer than this weekend to get the sides up and the mesh in. The mesh is going to take a long time. The kit should go together nicely. Though I have a few things I want to pick up from Home Depot before I build them. Mainly some over priced prowood to cut squares to sit under the posts. I also need wood to repair the fence that blew down in the storm today anyway…

So I’m, for once, not doing it all at once. I’m going to get the frame up and contemplate the fronts and lids. I’m thinking siding (vinyl or metal?), some sort of plastic? Not sure what I want to use. I’m going to try to use the dovetail cuts in the posts for the fronts but I fear they will be too thin and I’ll need to resort to my diagram of how I would have made them if I didn’t have precut trench in the posts. So I’m gonna build it and see what I’m working with. I’m also going to see what Home Depot has and how much it costs. Because cost matters.

So yeah. I thought I was a farmer growing pumpkins! Now I’m getting into fucking composting. Good lord. Bring your food scraps over, I’ll dump them in my compost. But not yet because like, it’s not done and I don’t have freezer space. I know. I’m sad too. I’m gonna have to toss these rotten bananas. Next time, though, the rotten bananas are compost food!

The Great Monstera Experiment Begins

Posted on | by cursingcats.com | Leave a Comment on The Great Monstera Experiment Begins

I know, a lot of plant posts. But, I can’t believe I haven’t posted about my Monstera! I told you about the Great Lemon Grass Experiment (they’re in rehab right now), the Great Pumpkin Experiment (we have some flowers coming back in!). Now we have the Great Monstera Experiment. And I do mean Great. Like GREAT BIG.

Back in June, we went to the plant swap. And holy shit, I won the door prize! There was a lot of stuff with the door prize (K, have you used that book giftcard?). The best part: A Monstera! Before this, I really only knew about Monsteras from them being my favorite plant in Animal Crossing. Now I HAVE one. So I had a lot to learn. I got into Monstera groups on Facebook and Reddit, followed plant people on youtube. Did I want to pole it? Whats the best pole to use? So much info.

However, June was also the month of the Washing Machine Incident. So it was July before I could actually do anything with this plant. Even re-potting it. And believe me, it needed a repot. The roots were growing through the holes in the bottom so much they blocked the drainage. I went and bought a really nice concrete planter for this baby. I wanted to upsize the pot, but not by much. And I needed the weight.

I decided I wanted to go with moss poles. Specifically: Easy D-Shaped poles. Upon inspection, I found that my Monstera actually had two plants in it (later found to be three). And those two plants were straight up facing each other. Fuck me. This sucks because it meant that to repot it with a pole, I had to separate the plants. Ugh. Here it is before the great repot. At this time, I had had it for about a month.

So I ordered some nice transparent and extendable D poles. I found the widest ones I could (I think they are five inches?), but I wasn’t sure I could get both plants on one pole. I ordered an eight pack though so I figured I would figure it out when the time came. Good thing I did that, because they needed two. Which kinda meant the plant actually got no new room since the poles took up too much space in the pot. Whatever. The good news is, I still have enough of the poles to extend three times (two foot each, but a few inches of overlap required).

I even bought the insanely expensive ethically sourced and harvested sphagnum moss straight from New Zealand. Yeah, it was fucking expensive. This free plant started costing a lot. But really, the environmental harm from sphagnum moss harvesting is devastating. Get that shit ethically, yall. They don’t HAVE to destroy the environment to harvest it. It can be done in a way that preserves the ecosystem. It’s just harder, produces less (but better quality), and therefore it’s a lot more expensive. Luckily that shit expands like crazy so I barely used any of it in this phase.

So after the insanely stressful surgery to separate the plants and tie them to the poles and do everything by the book — it looked like SHIT.

This was the trust the process part. It has to get worse before it gets better.

So, my Monstera was a mess. It had been completely turned around and the petioles were just all over the place. So I bought the Velcro plant ties. Name brand — they were WAY BETTER than the cheap shit that came with the poles. The Velcro brand plant ties are amazing — so soft against the plant. Love them. So yeah, my actual Stems are only about 5 inches at this point so there’s only so much anchoring I can do to the pole. But it is also already very thick and woody.

So.

I had to train the leaves. I did this very slowly. For each petiole, I wanted to move, I made a thick padding of paper towels folded over each other. I wrapped that loosely around the petiole and used the velcro ties to tie it to the pole. Not a lot! It was a slow process. You can’t just jerk them back. So over weeks, I’d shorten the velcro length to get them more upright.

At this point, after 2 months, I am proud to say, only one petiole is actually being supported. In fact, I can probably remove that now. It’s pretty solid. Here’s a picture from this morning:

I have not and do not plan to remove any damaged leaves. As you can tell from the picture where I brought it home (and the fact that two plants were potted facing each other), it didn’t have the best care. This wasn’t intended to be someones love project. They expected someone to take this home and slowly kill it. So the leaves are very wonky and curled in all kind of ways. One of the leaves is only a fraction of a leaf. But fuck you, I’m gonna make the most beautiful Monstera your ass has ever seen.

It’s already looking 1,000% better than it did. This month, it already spit out three new leaves! Yeah three! Turns out, there’s a tiny baby vine in there. The new leaf is only its third one. You can’t even see it in these photos. The aerial roots are taking to the moss extremely well. So glad I went with the D poles. They don’t dry out very fast. I’m sure that will change in winter — but they stay moist well over a week because they’re only exposed at the front by the plant.

Also, having used two side-by-side, they really strengthen each other as I have the zip-tied together in a few places. As it gets taller, I might need a board or metal bar on the back to keep it study and straight. But I honestly think I can get to 5 feet before I need extra support. Right now, I’m not even using a foot of the pole (well, above soil, I should say — its obviously buried in the pot). Also, I’ll have enough room for my third vine growing up!

So here, my friends, is my grand plan:

Yes! I plan to grow this motherfucker all the way up to the second story railing. I can’t go higher that that because, how would I possibly water the moss pole after it passes the second story? And eventually, it will get there. I’ve already picked out the perfect grow light and hanging bracket. I’m hoping it will go on sale for Black Friday. It’s the one that the youtuber KillThisPlant uses on his GIGANTIC indoor Monstera. (He’s who shared the Velcro tape too). It’s actually a really beautiful pendant light that I will be hanging from above. I can easily raise it but pulling in the cable length as the plant grows taller. That’s what I drew in the blue so badly on that photo mark-up. Though I acknowledge that halfway up, I might need to get a second pendant. We shall cross that bridge we we come to it. For right now, we’re using the ugly grow light I purchased to overwinter my plants last year. I measured it with a light meter and it’s putting out well over what I need to get this thing big and healthy.

Then when it gets too tall, I’ll be able to chop and prop and keep the top 8ish feet of pole and move the mother plant and keep extending. I’ve seen a lot of tutorials on how to do this and they all use moss poles. If you get enough roots in the actual pole, the plant can survive a repot with minimal stress after being cut from the mother plant. And then repeat forever.

Most of the plant youtubers don’t have the space for the giant Monstera leaves as they grow indoors and that’s what hampers them. They just can’t let them get so huge indoors. BUT I CAN! I got space. This is going to be the centerpiece of my house. My pièce de résistance. When you enter through the beautiful doors you will see Sir Bastian and this TWO STORY MONSTERA. And you will be amazed.

Shout out to the youtubers who have taught me far more than I even thought I’d want to know about Monsteras:

THEY KILLED MY PUMPKINS!

Posted on | by cursingcats.com | 2 Comments on THEY KILLED MY PUMPKINS!

Oh my god. Yall. Yall. I can’t. I fucking CAN’T WITH THIS.

We had our gutters cleaned Thursday (four days ago). Today, I found out that they disconnected the automatic watering system to the pumpkins. They hooked it back up (hence, I didn’t notice) but neglected to turn the water back on.

Now, I don’t expect you to know how I have my water hooked up or why. But I do expect you to tell me when you fuck with it. WHY WOULD YOU NOT?

And you may ask yourself, why didn’t I notice they weren’t getting watered? Well, they droop dramatically between waterings (every 6 hours) every day because it’s in the 90s every day. They pop back up at the next watering, so I’m used to ignoring the wilt. Also, I have been fighting squash bugs with all my life this summer. Just last week I saw MORE EGGS on a leaf. So yeah, I did notice they looked bad. I put out a whole bottle of Seven and a whole can of Raid this weekend.

I also ordered some worm castings concentrate from Amazon to try to perk them up. Today, I decided to turn on the automatic waterer which would fill the gallon jugs and I could just drop the concentrate in each jug.

So I switch the waterer to manual and it kicks on (the water left in the hose) and immediately off. I fuck with it for a while. Try a few more times. Nothing. It’s hooked up! I unscrew it… no water. There’s no water coming through the hose. So I go to the spigot on the house — it’s turned off.

Why would it be turned off? This hose goes under the pumpkins, you can’t use it. Oh. Oh. They must have disconnected it and used another hose and then reconnected mine but didn’t turn the water back on.

That explains the rotting baby pumpkin I lost yesterday (I tend them daily). That explains…

All of this.

Those motherfuckers killed my pumpkin patch. Will the rest of the growing pumpkins die as well? Will any of the vines bounce back after four days in scorching heat and full sun without a drop of water?

MY PUMPKIN PATCH!

I don’t even WANT to begin to add up how much money I have poured into this pumpkin patch. The set up of buying everything, all the dirt, all the squash bug treatments, all the fertilizers, the compost, the mulch, the DAILY tending.

MY PUMPKINS.

YOU KILLED MY PUMPKINS.

I had a terrible day at work and now you’ve destroyed months of work. Months of a new hobby to try and bring some joy to my life AND THEY KILLED IT.

I’m going to go die now.

String of Bananas (Curio Radicans) and Hanging Plants from a Closet Rod Tip

Posted on | by cursingcats.com | 1 Comment on String of Bananas (Curio Radicans) and Hanging Plants from a Closet Rod Tip

String of Bananas Repot, Chop, and Prop

Isn’t it funny all the trailing plant names? String of Pearls, Bananas, Fish hooks, Dolphins, Turtles — just to name a few! Today, I repotted my something and decided to use Google Image search to identify it. Turns out it is a String of Bananas Plant. Well isn’t that cute? Now that I’ve found out what it is — everyone has all these very fussy instructions on how to care for it.

Listen. If you’ve been to my house in 5, maybe more years — you’ve seen the terrarium on my kitchen table. It’s where my succulents live. They’re in a terrarium because Jack was a plant eater. Louie gives no fucks (typical Louie).

I just buy the little 2 inch pots at the nursery. I’m not good with succulents so when they die, I just pop them out and replace them like a kids goldfish. Nothing to see here. But the String of Bananas was one of the OG succulents in here. It might be the only OG I have.

When I started this terrarium of succulents (before that it had other plants rotated in – including a bonsai which died leaving that square pot), I bought a variety. I wanted different textures and colors. So the String of Bananas would add a little hanging accent. Mom always said you need a Spiller, a Filler, and a Thriller. These would be my spiller.

Well, that damn thing just kept growing. It was like maybe 2-3 inches long when I bought it. It just started to fill the terrarium. Eventually I took it out and folded it nicely and put it back in. Still, it had to come out at some point. So when I did my home office and added hanging plants in the window, I put it in a hanging basket. When it got too long, I’d just fold and swing the trails over the pot to grow down the other side. When I moved it to the bedroom, it looked like this:

A few weeks ago, I noticed little roots growing out of the bottom of the inner pot. Time to get a bigger pot! So tonight, I repotted from that 6 inch to an 8.5 inch. But first, I had to untangle it…

Holy shit, the trails are over 5 feet long, easily! It’s pretty thin though. So rather than wad it all up again, I went chop and prop. I cut it into three sections and rooted the lower two sections back into the main pot. I used rooting hormone and this thing has grown like a weed, so I hope they take. Apparently, it will split in two where it was cut, so I hope to get a fuller plant this way. Then when it’s full and long, I can drape the length over the rod like a window swag. I’m so fancy.

Go go, little Banana Strings.

Hanging Plants Tip: CLOSET ROD

Also, when I went to grab that picture, I saw I didn’t post about hanging plants in my bedroom. WTF? I’ve just been so damn tired and fucking depressed and anxious and all over the place lately. Sorry!

So back in June, we had the floors redone. Everything had to be moved out of the downstairs. I’ll link that post here. So all of my plants went to the Master Bedroom. I made myself a little nook to live in since we had to live upstairs for a month. And you know what? I really liked having plants in the bedroom.

(NOTE: Fuck me, I haven’t posted about my MONSTERA? WHAT? I gotta post that.)

So I decided I need some plants to keep in the bedroom. Only problem was how. That card table was only there temporarily so I could put the plants in there. It was also too far from the window to get great light. I wanted to do hanging plants! Like in my office!

As you can see, I just hung the plants in my office from the curtain rod. The String of Bananas was in here with the Creeping Jenny, but I moved it to the bedroom. Now the Creeping Jenny can shine.

Problem: There’s nowhere to put a center support in the bedroom window. It’s a curved window. It’s over six feet wide. A six foot curtain rod would sag without a center support even without the weight of plants on it. So I brainstormed on it for a while. I pondered. Obviously, if I had tools and resources, I could buy a nice solid curtain rod, cut it to length, and make nice brackets. But we’re trying to do this on the cheap here. I need COTS parts.

CLOSET ROD!

Thin closet rods are rated at 30 and 40lbs. And I can get one the right length from Lowes or Home Depot! So I went to Home Depot to look at my options. I chose a seven foot clothes/closet rod and the least intrusive brackets I could find.

BAM! Hanging plants. I LOVE THEM! And this picture is a month old. The big leaf thing has new leaves, the Christmas Cactus of Friendship was trimmed for propagation (to continue the friendship train) and already has three new leaves coming in. The pot of nothing on the far right is the free zig zag cactus cuttings I got from the plant swap. They haven’t done SHIT. They also haven’t rotted or dried out, though. So I’m waiting it out on that.

I’m super happy with it. My joy was a bit (a lot) dampened by the fact that husband thinks it’s ugly. He’s not against the plants, but he hates how far it sticks out from the window. He wishes I would have just got a table or something. But like, that wouldn’t have worked. I can’t just go find a nice two foot tall skinny couch/entry table that looks nice on a $30 budget. Husband is unreasonable on some things. We can make it better in the future — but I can have SOMETHING now.

I don’t love that it’s so far from the window — but I love having my hanging plants in the bedroom! And I think it was a damn clever solution. I even hung some mementos on the ends. He didn’t even recognize the blue heart necklace pendant he gave me 14 years ago that was pinned under my skirt as my “something blue” at our wedding 12 years ago. Now it’s catching the light in our window. With my plants.

Maybe in the future, I’ll hang a nice rod from the ceiling — or do custom brackets. But for NOW, closet rod was genius. It’s not even sagging at all — even with the new larger pot for the String of Bananas. So if you need a dirt cheap way to hang some plants — closet rod.

I’m really enjoying having indoor plants now that my cat doesn’t give a fuck about destroying them.

Pumpkin Farming Adventures

Posted on | by cursingcats.com | Leave a Comment on Pumpkin Farming Adventures

Welp, the first pumpkin patch experiment continues. I’m learning a lot. It’s not going as well as I had hoped. Keeping up with their water needs has been a huge pain. I had to get a cheap irrigation line and timer. The timer runs every 6 hours (it was that or every 12). They still wilt in the afternoon heat.

But then, global warming is killing us. Like literally, it’s cooking us.

Then I thought, maybe the water was draining through too fast. So I rigged up milk jugs to fill with the water and slowly disperse it through a pin hole. They perk up right after watering, but I worry how it will affect the fruit.

Slugs have also proven to be a problem. I expected assault from above and so I used insect netting. Turns out slugs were coming out between the mesh barrier and concrete and munching my leaves. I went out one night and saw the fuckers just eating away! WTF?

At first, they just terminated two vines early. But by the time I got slug bait/poison, they got to the heart of one plant and the main vine of another. Here’s how they looked this weekend:

Last night, I went out and cut off all the yellow leaves and found the heart of the problem. They had directly attacked the main vine. It has healed, but all that yellow in the middle died. Here it is today:

So frustrating! That’s the Jack-o’-lantern plant that had a month head start over the others. It takes 120 days to mature so it went out early. Bastard slugs!

Still, I’m finally getting some female flowers to pollinate! You can see that I removed the insect mesh since it wasn’t doing any good. I decided it would better serve me to cover more ground to keep out slugs and keep the weed vines from tangling with my pumpkin vines.

The past two mornings I’ve been able to go and fertilize two females each morning. Two minis and two large. Tomorrow, another large should bloom.

Im not sure if it was the slugs or my pinching off the male flowers that was causing my females to prematurely fall off. Maybe both. But now that I’m letting them bloom freely and removed the netting, there are many happy bees. Look at these cuties from this morning:

They were inside the prettiest vine. I think this is the vine that grows the big grey/green pumpkins. Love the variegated leaves and it has the prettiest flowers.

Unfortunately, it’s also the ones where the slugs attacked in the soil. I know because the marigolds I planted there are heavily munched. It is stunted, but still has some growth. No females on that one yet.

Lessons Learned So Far

I was very smart to put down a ground barrier. So smart that I used the insect netting to extend that barrier on the side. I used a sun sail and it is great. It’s thick and doesn’t let water sit long. Also blocks the light out and looks clean. However, I think the double layer of insect netting will serve the same purpose at a cheaper price. It’s much thinner. It will not keep light from the weeds, but it will keep them under it. It also stays wet longer, but I don’t think it’ll be too bothersome.

I like the twine that I tied from the plants (the poles that were holding up the netting) to stakes across the barrier. The vines want to grow towards the south and I’m training them to the East. I just inspect them every day or two to note female flowers and twist the latest growth around the twine. Also, since I’m growing in grow bags, the main plant is about 2 feet off the ground. This led to my first vine folding under its weight (had to use wood trim to support it). The twine has allowed me to slowly train the vines down to the ground while supporting the weight.

As for cons, well, slugs. I’ve got bug repellent and slug killer out now. The vines are so close together that it is murder to walk through for inspection. But I have to keep track of my female flowers. I only have one of each vine so I can’t rely on the pollinators. Maybe two of each type next year? Or make sure I use the same species so they can inter-pollinate? I will judge after the yield.

I’ve also let the vines on the sides spread out to make more room. I’m even letting the Jack-o’-lantern climb the stair railing to get it off the ground and away from the slugs.

The critter netting worked great until I could get everything growing well. Then, I added a layer of compost and a layer of mulch.

Instead of the cheapest timer, it might have been worth getting one with more customization options. Then I could water only in the heat of the day and not every 6 hours. Turn it on when it’s drooping and skip watering when it rains.

Another fail was using a cheap hose. I hooked up the timer with a cheap hose. It burst the next day. No shit. I guess it wasn’t meant to hold water pressure in a bend and full Alabama sun. Had to steal the hose from the garage for it!

This has been a more expensive and frustrating adventure than expected. Especially before this week. For two months I’ve been tracking female flowers only for them to fall off before they bloom. Now that I’m getting possible pumpkin babies, I’m much happier. I do hope they survive so I can watch them grow!

Oh, and I bought little labels to very loosely tie around the females to keep track of them. Super helpful when digging around in there to see if they’re soon to bloom. The females grow much closer to the main stem so you have to push leaves aside to find them.

It’s a big learning experience. I do hope to have something to show for it this Fall! It’s also been nice to watch it grow in that ugly rock corner. Such insanely large plants I started from seed!

Grow, my pumpkins, grow!

Spiffing up the deck

Posted on | by cursingcats.com | Leave a Comment on Spiffing up the deck

Now that I’ve been gardening, I need to start cleaning up the deck. I mean, that lemongrass has to have somewhere to go!

We built the deck last year. The deck plus a professional paint job was like 8sih K. So, of course I asked how to care for it. I was told to give it a pressure wash every year and I should be solid. So, I need to pressure wash. I want to buy a powerful pressure washer. We have a big house. We have the garage, the pool deck, the wood deck, sidewalk, two stoops. I really want to wash the Juliet balcony and stoop ceiling. I did some research and decided to upgrade my price range to about 3 or 4 hundred, but I just got overwhelmed. So I just asked to borrow K’s pressure washer to get the deck done. I will try to get a good pressure washer during off season.

First, I discovered my deck is like a white car. You don’t realize how dirty it is because it just looks like a different shade of ecru. It was dirty. And I had to clean it like an inch at a time. It was far more tedious than I expected. I didn’t get the good satisfaction either. The red clay is not coming off. So the lighter the deck got, the more noticeable the red clay spots were. Ugh. Also, there’s been a ton of major construction behind us. A whole neighborhood. Right now the house that backs up to us is under construction. This means red clay dust.

I learned about that the first time we opened the pool after construction started. My pool cover is a very heavy thick mesh that lets no light through. But red clay was all over the bottom of the pool. Pool guy explained it was the construction. Well, now I see that that red dust gathered in the piles of leaves that say on the deck for months. So I really should be cleaning it in winter after the leaves fall. Live and learn.

I figured, while I’m out here, I’ll clean the stoop. Oh. My. God. Why is my stoop a whole-ass different color? I knew it was dirty — but jesus! So gross! I was horrified. Now I’m definitely buying a pressure washer! And where I went along the edge of the brick, I accidentally made lines on the concrete. I tried to blend them out and it just looks worse. UGH.

I REALLY want to do the pool deck now. But I want a more powerful washer so I don’t have to do it an inch at a time. Also, I’m not about to out that much wear on a borrowed tool. That’s a lot of concrete to clean.

The steps were not satisfying either. They were just disgusting. The top of the stoop was satisfying. Nice lines I could write in if I wanted. But, see, I thought the top of the stoop was clean. I always have a rug on it. So I thought it was clean. And it was NOT. So now I’m not satisfied or happy I washed stuff — I’m just disturbed. EVERYTHING needs to be power washed now. It’s not OK. But it has to be OK because I’m not buying one right now. I’m about to open the pool and buy a new salt cell to be installed too. And I want an adirondack chair. So it will wait.

Then, I spent half my Saturday dreading putting everything back on the deck. But Husband helped and we got it done. I finally hung the solar lights I was gifted for Chirstmas. Thankfully, I had enough to double over, because these lights were super far apart. So this is actually a doubled over strand. I’m also very happy with the posts I bought to raise them up above the fence. I wish I’d installed them at the top of the board instead of the bottom to get just a little more height, but they’re there now.

Also, I will say: These lights were tangled as fuck. I felt like Russ in Christmas Vacation. They had a garbage tie in the center… and yet, it did nothing. I literally had to walk along the fence and pull each and every bulb from the giant knot. Then when I went to test them, they didn’t come on! So I thought it must have been all the vigorous shaking and tugging of untangling them! So I left them alone and went inside to put pillow cushions on. Then I read the directions for the remote and saw that they won’t come on if there is any light present. They only come on in the dark. This picture was immediately after they finally came on:

Speaking of pillows… I bought pillow covers! My mom has gifted me many outdoor pillows over the years. Walmart always sells them super cheap. They’re $5 right now, actually. And I never had the heart to throw them away. One year was fancy browns with text that I didn’t care for a lot. One year was the flamingo and the watermelon “Sweet Life.” Then the last year was the Blue Flamingos. Those were my favorite but three summers after her death, they were very faded. And the watermelon straight up tore open. I actually considered painting over the flamingos to make them bright again, but I can’t keep every bit of mom.

Then, a thought occurred to me. I don’t need new PILLOWS. I can keep moms pillows. I just need COVERS! So I spent an evening browsing the internet for outdoor pillow covers. I’ve always had the pool in a blue and green theme. Then last year, I replaced the main pool umbrella with an orange one. So I wanted to keep my blue and green but bring in some orange. And here we go!

I got a super cheap 4 pack of the blue and green watercolor. They are actually all 4 different. They’re also not a great material, but they look awesome. Only three needed here. Then I just got a cheap solid orange with white piping. Oh. And the cat. COME ON — I couldn’t not get that dork cat. It’s fucking adorable. I’m sad it’s on yellow because that’s not in my colors, but I had to have that one. I like them so much that I’m getting UV fabric protection spray so hopefully they won’t fade so much.

I’ll also note the difference in everyone’s version of a 16×16 inch pillow case. The orange ones were pretty spot on. The blue and green, the pillow had to be curled over and forced in there. And the Yellow cat was HUGE. I actually stuffed him with pillow fluff to fill it out more. That will be the soft pillow for lounging.

Oh and I ordered bright green spray paint to refresh my faithful 8 year old cheap plastic adirondack chairs for the second time. Problem with those is… I like them on the deck. They’ve been on the deck all winter. In the summer they are across the pool by the tanning ledge. This is so someone (usually husband) can grab them to sit on the tanning ledge and not get wet but have their feet in the water. So I do need them there. However, I’d like to have one on the deck. So I might get a nice(er) one for the deck. Not wood — aint nobody got time to keep up with that. But maybe one of those thicker plastic ones that aren’t all flimsy? I like having somewhere to sit on the deck that isn’t a hammock.

So I spent a lot of time outside today. Mainly waiting on my lights to come on. I refilled the squirrel feeder. As I sat in my hammock chair — desperate squirrels kept coming by to check it. Then the Cardinal couple came. It’s a female and a male and they always come together to watch out for each other. Well, fuck — yall need some black sunflower seeds! So I filled it up and waited on my lights.

The Cardinal couple didn’t come back, but Carlton did! We call the big male cardinal Carl. Now there’s a much smaller male. So I call him Carlton. I left a little pile of black sunflower seeds on the concrete pad in hopes that the couple would come back. Carlton found it!

Excuse how terrible that photo is. It was at FULL zoom. I was trying to move very sneakily so as not to scare him (he didn’t realize I was in the hammock). So I had to slowly sneak the camera over enough to get past the fern.

It’s nice sitting on the deck and watching the wildlife. Carlton is eating seed there, and there’s a squirrel sitting on the feeder having dinner too.